Switch Sensor

Showing all 5 results

  • Air Flow Sensor

    Each AVTECH Air Flow 1 Sensor (NC) and Air Flow 2 Sensor (NO) provides real-time recognition of air flow stoppage. This Air Movement Sensor is normally closed and includes a mounting clip and clamp. Typical use is for measuring air flow in an HVAC duct, under a raised floor, or near a fan on a rack cabinet or important server.

    This is an instant ‘Plug & Play’ sensor via one of the switch sensor channels on the back of any compatible Room Alert ID box. Cable distance can be extended from the standard 25′ to approximately 900′ by using standard speaker wire, twisted pair or any reliable low voltage 2-wire cable. This sensor is equivalent to the discontinued Stego Air Flow Sensor #01300.0.

  • Flood Sensor

    AVTECH’s Flood Sensor with attached sensor cable is activated by liquid (i.e. water, fluid, etc.) making contact with the attached Flood Sensor Cable of any length. Once liquid is detected the Flood Sensor triggers an alarm condition allowing the Room Alert hardware, Device ManageR software and/or other monitoring application to send out alerts and/or take automatic corrective action.

  • Motion Sensor

    AVTECH’s Motion Detection Sensor is a movement sensing device specially equipped with additional electronics that allow it to interface with any compatible Room Alert ID box. The motion detection system is powered by a 12V DC Power Supply and is designed to detect movement up to 35′ away with a cone coverage of approximately 84 degrees wide.

  • Room Entry Sensor

    AVTECH’s Room Entry Sensor provides real-time recognition of a door or cabinet being open. Standard use is to mount the wired sensor to the frame of a door. Then, mount the matching actuator opposite of the sensor on the door itself. When the door opens, the two components separate and the sensor trips.

  • Smoke Sensor w/Escape Light

    AVTECH’s Smoke Sensor provides real-time recognition of smoke or fire and includes specially designed electronics that allow it to interface with Room Alert products as a switch sensor. Powered by one 9V Alkaline battery (included), this model has a bright ‘escape’ light and loud ‘buzzer’ that are triggered if the sensor is activated.